1.58 INTERNAL SIG
NEW INTERNAL LOBE PUMP “SIG” SERIES
The SIG pumps are based on the proven rotary trochoidal design – gerotor principale.
The pumps are designed to meet specific demands of OEM’s
The reliable performance of the SIG series makes them an ideal choice for various industrial applications.
• Specially coated internals for pumping of non –lubricating liquids.
• Engineering plastics rotor set for chemicals & low viscosity fluids
• Specially designed pumps for vacuum duty applications
ADVANTAGES OF SIG PUMPS
• Single shaft – well supported at both ends
• High suction lift and low noise level as well as vibrations
• High volumetric and overall efficiency
• Continuous, pulsation free flow due to axial entry in pumping element
• Compact and light – weight design
• Ease of assembling and dismantling without disturbing the pipeline.
• Choice of oil seal / Mechanical seal / gland pack.
• Parts / Pumps interchangeable with well known brands.
• Transfer from tank to tank
• Emptying of barrels
• Lubricating and cooling of bearings ,gears, mechanical seals and machine tools
• Fuel oil booster
• Fuel oil
• Lube Oil
• Neutral liquids with lubricating properties
|MODEL||PIPE SIZE IN MM SUC X DEL.||DISCHARGE||PRESSURE IN KG /CM2||NET WEIGHT KGS.|
|LPM||M3/Hr||MOTOR REQUIRED IN HP (SPPED 1440 RPM)|
|SIG – 10||15 X 15||10||0.60||0.25||0.25||0.50||0.5||0.75||0.75||3.000|
|SIG – 15||15 X 15||15||0.90||0.50||0.50||0.50||0.75||0.75||1.00||3.300|
|SIG – 20||15 X 15||20||1.20||0.50||0.50||0.75||0.75||1.00||1.50||3.600|
|SIG – 40||25 X 25||40||2.40||0.50||0.50||0.75||1.00||1.50||2.00||6.800|
|SIG – 80||40 X 40||80||4.80||1.00||1.00||1.50||2.00||3.00||3.00||8.500|
|SIG-125||40 X 40||125||7.50||2.00||3.00||3.00||5.00||5.00||7.50||24.000|
|SIG – 150||40 X 40||150||9.00||2.00||3.00||3.00||5.00||7.50||7.50||25.000|
|SIG – 175||40 X 40||175||10.50||2.00||3.00||5.00||5.00||7.50||7.50||26.500|