1.88 VERTICAL AXIAL FLOW PUMP

VERTICAL AXIAL FLOW PUMP

Download

pdf

 

 

The Axial flow suspended shaft vertical pump is a single stage propeller type design. This family of pumps is specifically designed for low head movement of water for a multitude of municipal, agricultural and industrial services, Contact Vertical axial flow pump supplier, Vertical axial flow pump manufacturer.

APPLICATIONS

• Flood Control,

• Water Treatment,

• Shipping,

• Ground Water Development and Irrigation,

• Cooling Water (power),

• Dewatering and Water Supply (mining),

• Agriculture

 

INDUSTRIES

• Mining,

• Water Resources,

• Power Generation,

• General Industries

Vertical axial flow pump

 

Three- or Four-Vane Axial Flow Propeller is hydraulically balanced via pressure equalizing balance holes and a top propeller hub wear ring to reduced axial down thrust.

Outer Flanged Columns are bolted together with through bolts for ease in assembly. Alignment is maintained via centering fits on all parts

Flared Suction Bell provides a smooth waterway entrance to the impeller and has integral splitters to reduce inlet swirl and entrance losses

Stator Case With Integral Diffuser Vanes may be either a single-piece casting or a fabrication.

Discharge Elbow may be located above or below ground and at any outlet orientation.

Seal Chamber accepts packing or mechanical seal to suit service requirements.

vertical flow pump manufacturer

 

OPENING PARAMETERS

• Flows to 181700 m3/h (800 000 gpm)

• Heads to 11 m (35 ft)

• Speeds to 1770 rpm

• Sizes 200 mm (8 in) to 3.1 m (123 in)

• Settings to 8 m (25 ft)

The VAF is a vertical high efficiency, axial flow impeller pump together. we have a complete range of this type of pumps which are suited for applications that require large quantities of flow with low head.

 

CHARACTERISTICS

• Multi-stage vertical centrifugal pump, diffuser type bowl.

• Axial flow impeller, high efficiency.

• Can handle solids up to 14” diameter (365 mm).

• Counter clockwise rotation viewed from shaft coupling.

 

DESIGN FEATURES

• API 610 latest edition construction available (VS3 type on special request only)

• Above or below base discharge.

• Discharge elbows designed to reduce friction losses, diffusers designed to minimize turbulence and increase efficiency.

• Product, oil or fresh water lubrication.

• Rotor ‘Pull-Out’ design available.

 

STANDARD CONSTRUCTION MATERIALS

Bowls: Cast iron with bronze impeller.

Column: Carbon steel with AISI-1045 shaft.

Discharge head: Fabricated steel.

 

OPTIONAL ACCESSORIES

• Basket type strainer.

• Extended suction bell (umbrella) to minimize vortices.